Biomechanical evaluation of dual-energy X-ray absorptiometry for predicting fracture loads of the infant femur for injury investigation: an in vitro porcine model.

Objective: The purpose of this study was to determine the ability of bone mineral density (BMD) measured by dual-energy x-ray absorptiometry (DXA) and geometry measured by biplanar x-ray to predict fracture mechanics in vitro in an immature femur model.

Methods: Prospective analysis of radiographic and biomechanical data was performed. Methods: In vitro experimentation. Methods: Bone geometry and DXA data were obtained before mechanical testing. Twenty-two porcine femora from males and females (age 3 to 12 months; body weight 3.6 to 7.0 kilograms) were fractured. Mechanical tests were performed on the diaphysis of the femora in two loading configurations: (a) three-point bending to simulate loads that result in transverse fractures; and (b) torsion to simulate twisting injuries that result in spiral fractures. Methods: Correlation of radiographic data with the experimentally determined bone strength.

Results: Three-point bending consistently resulted in transverse fractures. Femoral diaphysis BMD (mean, 0.304 grams per square centimeter; SD, 0.028 grams per square centimeter) strongly correlated (r2 = 0.938) to fracture load in bending. Load at failure ranged from 530 to 1,024 N (mean, 726 N; SD, 138 N), consistent with the findings of Miltner. Empirically derived strength parameters coupling BMD with geometry accurately predicted bending loads (r2 = 0.84, p < 0.001) and energy to failure (r2 = 0.88, p < 0.05). Torsional loading failed to generate spiral fractures consistently, resulting in either end plate or diaphyseal fractures. Load at failure for torsion ranged from 1,383 to 3,559 Newton-millimeters (mean, 2,703 Newton-millimeters; SD, 826 Newton-millimeters). Because of these inconsistent fracture results, empirical strength parameters for torsion could not be derived.

Conclusions: BMD coupled with geometry is a strong predictor of bending fracture loads in the immature femoral diaphysis. A similar relationship could not be shown for torsion because of inconsistent failure results. This study represents an initial attempt at developing a methodology for predicting the strength of young bones from radiographic measures. Further research is required to establish this methodology and to show the necessary correlation with immature human bone.