Biomechanical properties (compressive strength and compressive pressure at break) of hyaline cartilage under axial load

Objective: Explanations concerning the physical properties of hyaline cartilage are different. It was the intention of this study to determine the material parameters of hyaline cartilage under axial load (elasticity, plasticity, elasticity and module pressure stress to break).

Methods: Specimens from the medial femoral condyle (chondro-cortical ships) from adult female domestic pigs (n=28) were used for the experiments. The specimens were completely embedded in plaster to minimize shearing. Axial load was carried out by an universal mechanical testing machine (Zwick Z2.5/TS1S, Ulm, Germany) to determine elastic and plastic deformation and pressure stress to break.

Results: Axial load up to 5 MPa produces an almost elastic deformation, an increasing axial load results in a plastic deformation. In the range of 3 to 5 MPa the principle of Hooke is valid. The elasticity module amounted to 39.2 +/- 11.9 N/mm(2), determined under 3.8 MPa axial load. An axial load of 25.8 +/- 5.2 MPa (sigma max ) causes a break of cartilage. A strong correlation between break resistance and thickness of the chondral slice (r=0.71; p < 0.05) was observed.

Conclusions: The low module of chondral elasticity characterizes this tissue as "soft". Moderate axial load causes an ideal elastic, higher axial load a plastic deformation. The medium pressure to break to amounted 25.8 MPa. The medium pressure to break of 25.8 MPa is comparable with the forces produced by an unrestrained limited downfall from a height of 4.3 m. It must be concluded that isolated chondral fractures are rare consequences of a trauma as long as accompanying ligamentous or osseous damages are not found.